The Sieve Shaker is powered by an electromagnetic drive which has no rotating parts to wear making it maintenance free and extremely quiet in operation. The vibratory action produced by the power unit moves the sample over the sieve in a unique way producing faster more effi cient sieving, while the rapid vertical movements also help keep the apertures from pegging.The digital controller is used to set both the process time and amplitude setting while a further control enables the vibration to run continuously or intermittently. Accepts up to eight 200 mm/8 inch diameter sieves, lid and receiver.
Dimensions (l x w x h) 420 x 500 x 70 mm. Weight 43 kgFor 220 – 240 V AC, 50 Hz, 1 ph.
Flakiness Gauge is used to determine if aggregate particles are to be considered fl aky, i.e. their thickness is less than 0.6 of their nominal size. Length Gauge classifi es aggregate elongation by measuring the length of individual particles. Aggregate particles are considered elongated when their length is more than 1.8 of their nominal size. Length Gauge test is not applicable to material retained on 63.0 mm BS test sieve.
AG 0121 Flakiness Gauge AG 0122 Length Gauge
Flakiness Sieves are used to determine particle size shape or geometrical characteristics of the aggregates. Each sieve made from heavy gauge steel sheets in dimensions specified in the standards and coated with electrostatic paint.
AG 0101 4.9 mm slot sizeAG 0102 7.2 mm slot sizeAG 0103 10.2 mm slot sizeAG 0104 14.4 mm slot sizeAG 0105 19.7 mm slot sizeAG 0106 26.3 mm slot sizeAG 0107 33.9 mm slot size
The Flame Photometer is a device
used in inorganic chemical analysis
to determine the concentration of
certain metal ions, among them
sodium, potassium, lithium, Barium
In principle, it is a controlled flame
test with the intensity of the flame
colour quantified by photoelectric
The instrument is fitted with
automatic flame failure detection for
user safety, making it ideal for use
in laboratory, industrial sites and
Flame Photometer supplied
complete with Na, K, Ba, Ca and
Li filters, connecting hoses and clips,
compressor plug and drain trap
The Flow Table test is used for determining the
consistency and workability of fresh concrete. The conical mold for casting the flow specimen and the calliper
for measuring the diameter of the mortar after it has been spread on the flow
The apparatus consists of a double steel table, the upper
table measuring 700x700 mm and hinged at one side to the lower table.
The top table is inscribed and all parts are protected
The stainless steel cone has a top of 130 mm dia., base of
200 mm dia. and highest of 200 mm. Supplied complete with wooden tamping rod.
EN 12350-5, BS 1881-105
Weight approx.: 30 kg