The Cement Compression and Flexural Machine 25/250 KN is Fully Automatic and has been designed for testing the compression on the 50x50x50 mm cube molds, 40x40mm and the flexural on the 40.1×40 x160 mm prism molds according to the related standards.

The machine consists of a very rigid two column frame with a double test chamber, automatic closed loop controlled hydraulic power pack and an LCD graphic digital control and readout unit.

The very silent power pack can load a specimen between 1 kN/sec to 20 kN/sec.

On the dual-stage pump, a high delivery low-pressure pump is used for a rapid approach and low delivery high-pressure radial piston pump is used for test execution.

On all power packs, the maximum pressure valve is used to avoid machine overloading.

On both frames, the load is measured by the load cell to get accurate test results. The machine is supplied with safety doors and can test samples up to 250KN.

The LCD graphics data acquisition and controls system is designed to control the machine and processing of data from load cells.
The digital graphic display allows real-time load vs time graph. At the end of the test cycle, the results can be stored in memory (up to 250 test results) or downloaded to a PC using the software format.