Search Results for: Ductility Testing Machine

The Ductility Testing Machine used for determining the ductility of bituminous materials by measuring the elongation of briquette mold

DUCTILITY TESTING MACHINE

The Ductility Testing Machine used for determining the ductility of bituminous materials by measuring the elongation of briquette mold with molten bitumen in it which is pulled apart at a specified speed and a specified temperature.

The test shall be made at a temperature of 25 + 0.5°C with a speed of 5 cm/min + 5.0%.

Digital Thermo regulator with over temperature alarm and probe, cooling coil, traction carriage holding molds, circulation pump for stirring the water.

The Ductility Testing Machine with Cooling Unit has the same specifications as the ductility Testing Machine but with an additional cooling unit for better temperature control

The Force Ductility Testing Machine has 3 load cells and variable speeds. The accuracy of load cells is ±0,1N with a maximum capacity of 300 N. It has a cooling unit and digital graphics display, automatic control and Data Acquisition Unit, load-displacement curves and software.

The speed can be set and load-displacement curves are drawn through the software.

FLEXURAL TEST EQUIPMENT

The Flexural test equipment is used to test flexural strength of concrete beams, kerbs, interlocking pavers, flagstones and blocks of different sizes.

The flexural test equipment ranges from 100 kN to 300 kN capacity, it has been designed for reliable and consistent testing due to its heavy steel fabrication and design.

The flexural test equipment comes in two types of frames, the U type and the C type frame. Both very rigid design is ideal either for conventional flexural test or for more sophisticated tests such as deformability and ductility index.

The Flexural Machines feature the complete automatic test cycle with a closed loop digital readout. Once the specimen parameter have been introduced, it is sufficient to press the START button to complete the test.

The Flexural Frame can be connected to any Geotechnical compression machine as a second frame or can be used individually with any power pack as an independent Flexural Machine.

Flexural test assemblies should be ordered separately.

• Bearers for flexure test on flagstones and kerbs to EN 1339 and 1340. Consist of two lower roller of
20 mm dia. x 600 mm length and upper load point of 40 mm dia with ball seating

• Bearers for flexural test on concrete blocks Consist of two lower roller and one upper roller of
20 mm dia. x 600 mm length

• Bearers for flexural test on concrete beams of 100x100x400-500 mm, 150x150x600-750 mm. Consist of two upper rollers and two lower rollers of 40 dia and 160 mm length. Complying to EN
12390-5 and ASTM C78.

The distance of the lower bearers can be adjusted between 100mm and 800mm. The distance between upper bearers can be set to 100mm or 150 mm.

During the 3 point Flexural testing one of the bearers can be removed and the other placed in the centre.