Universal Hydraulic Tensile

Universal Hydraulic Tensile Test Machine (600 kN capacity) is designed to test the ferrous materials for structural values such as yield strength and tensile strength. Apart from tensile tests, Universal Test Machines can also be used for compression tests up to the capacity of the machine.

The load cell is used to measure stress. Strain measurement is done by the electronic displacement transducer built in the machine.
Tests can be done fully automatic by the digital control unit or computer. Machine complete the test with the set pace rate and turns to start the position automatically.
The distance between the grips can be set by a motor-driven handset system.

The system is controlled by a hand up/down system. With open front hydraulic wedge grips, user can load specimen easily.

Hydraulic Grips
Hydraulically operated grips, completely stop the possibility of sample sliding from the grips enabling for correct and definite strain measurements.

Hydraulic Power Pack and Digital Data Acquisition & Control System
Hydraulic Power Pack
Hydraulic Power Unit is designed to control the machine and processing of data from load-cell and displacement transducers which are fitted to the machine. Controller unit has a simple and compact configuration.

Dual Pumps
The dual pumps are formed by two groups:
1. Grip pump with dual-stage pump
2. Piston pump to make tensile and compression tests
Our tensile testing machine consists of two independent pumps working in one oil tank system.
One pump is controlled with a digital readout unit with 3 phase controlled with an inverter to make test, other runs with a pedal to supply pressure to the grips. Grip pump has a dual-stage pump inside.

Digital Data Acquisition & Control System
The unit is designed to control the machine and processing of data from load-cells and displacement transducers, which are fitted to the machine.
All the operations of the unit are controlled from the front panel consisting of an LCD display and function keys.