CEMENT COMPRESSION AND FLEXURAL MACHINE
- Can control 2 frames
- Real time display of test graph.
- Multi-language support
- Different unit system selection; kN, Ton and lb
- Test result visualization and memory management interface
The humidity curing cabinet is used for curing cement test samples.
The curing cabinet provides from -25C to +70C temperature and up to 98% humidity of cement specimens by an immersion heater and refrigerator unit which are supplied complete with the cabinet.
The internal chamber and racks are made of stainless steel. The cabinet is equipped with digital control unit to monitor the temperature and humidity and recording chart.
The Cement Compression and Flexural Machine 25/250 KN is Fully Automatic and has been designed for testing the compression on the 50x50x50 mm cube moulds, 40x40mm and the flexural on the 40.1×40 x160 mm prism moulds according to the related standards.
The machine consist of very rigid two column frame with double test chamber, automatic closed loop controlled hydraulic power pack and LCD graphic digital control and readout unit.
Very silent power pack can load a specimen between 1 kN/sec to 20 kN/sec.
On the dual stage pump high delivery low pressure pump is used for rapid approach and low delivery high pressure radial piston pump is used for test execution.
On all power packs maximum pressure valve is used to avoid machine overloading.
On both frame the load is measured by load cell to get accurate test results. The machine is supplied with safety doors and can test samples up to 250KN.
The LCD graphics data acquisition and controls system is designed to control the machine and processing of data from load cells.
The digital graphic display allows real time load vs time graph. At the end of the test cycle, the results can be stored in memory (up to 250 test results) or downloaded to a PC using the soft
CM 0202 Full Automatic Cement Compression Testing Machines 250 kN
CM 0203 Semi Automatic Cement Compression Testing Machines 250 kN
CM 0204 Full Automatic Cement Compression & Flexural Testing Machines 250/25 kN
CM 0215 Semi Automatic Cement Compression & Flexural Testing Machines 250/25 kN
CM 0211 Flexural jig assembly 40x40x160 mm EN 196-1
CM 0211-1 Flexural jig assembly 40x40x160 mm ASTM C109
CM 0212 Compression jig assembly for ASTM C109
CM 0212-1 Compression jig assembly for EN 196-1